IL-BTO Range – Stainless Steel In-Line Mechanical Seal Chemical Process Pump
Sealed Stainless Steel Chemical Process Pumps
Special application stainless steel process pumps for abrasive, solids and sump applications
Special designs for specific applications
Capacities: 1 to 550 m3/h
Heads: 5 to 125 m
Pressure rating: PN 16
Temperatures: -30°C to +200°C
Kinematic viscosities: 0.5 to 350 mm2/s
Solids handling: Highly suitable
The very robust casing protects the pump against abrasion caused by solids particles. Due to the vertical in-line design, solid particles settle at the bottom of the casing when the pump is not running, keeping them away from the mechanical seal. When the pump is restarted, there are no particles around the mechanical seal, thus extending the seal life.
- Ideal for pumping fluids with solids concentrations up to 40%
- In-line process pump with a removable lower casing cover
- Extremely robust construction
- Time-saving assembly and disassembly concept
- Vertical in-line configuration taking up little space
KTP – Stainless Steel Multi-Stage Mechanical Seal Chemical Process Sump Pump
Capacities: 2 to 100 m3/h
Heads: 5 to 130 m
Pressure ratings: Up to PN 40 (injector: PN 16)
Temperatures: -20°C to +160°C
Kinematic viscosities: 0.5 to 350 mm2/s
Solids handling: 0%
Designed as a cantilever pump for use in combination with an injector or as a normal sump, this model is generally employed to pump fluid out of a main storage tank through the injector into a feed tank, where the pump is mounted. From there, the KTP pumps the medium into the plant’s piping system.
- Multi-stage sump pump, with injector for suction lifts up to 10 m
- Very robust design
- Suitable for fluids with a high solids content
- Ideal for emptying tanks that have no bottom drain when used in combination with an injector
- Maintenance-free injector without any moving wear parts
- Pressure ratings up to PN 40 for a wide range of applications, e.g. pumping liquefied gas
ZMP Range – Stainless Steel Mechanical Seal Chemical Process Grinder Pum
Capacities: 0.5 to 220 m3/h
Heads: 2 to 14 m
Pressure rating: PN 10
Temperatures: -20°C to +180°C
Kinematic viscosities: 0.5 to 1000 mm2/s
Solids handling: Highly suitable because of the abrasion-resistant pump chamber
This pump grinds, chops, macerates, mixes and pumps multiphase media all at the same time. Teeth on the rotor and casing liner reduce the solids in the medium to a defined maximum particle size. Slots and holes allow both coarse suspensions to be pumped and soft particles to be broken up.
- Five functions in a single pass: grinding, chopping, macerating, mixing and pumping
- Extremely robust construction
- Ideal for pumping fluids with solids concentrations up to 40%
- Customised casing liners available to reduce solids to the required size
- Pressure rating up to PN 16 for a wide range of applications
