CP Pumpen Sealless - MKP Range

 image

MKP Range - Stainless Steel Magnetic Drive

CP’s stainless steel sealless magnetic drive pumps utilise a unique construction with inverted drive configuration so that they require no plain bearing carrier.

This ensures and offer a more compact, robust design than standard magnet drive pumps to meet the stringent requirements of chemical processing and a multitude of other industries. These highly advanced and extremely energy efficient pumps are built to handle a huge variety of fluids reliably and absolutely safely.

Also designed for pumping solids-laden and low-boiling liquids, they can handle suspended solids in concentrations up to 30 per cent with a particle size up to 1 millimetre, depending on the pumped medium.

Their intelligent modular system facilitates assembly and minimises the costs of spare parts, maintenance and servicing.


 image

MKP Performance

Capacities: 0.25 to 650 m3/h
Heads: 3 to 145 m
Pressure ratings: PN 16, PN 25
Temperatures: -100°C to +350°C


  • Pump dimensions to DIN EN ISO 2858 and ANSI ASME B73.3
  • Unique construction with inverted drive configuration so that they require no plain bearing carrier.
  • Compact design with virtually no dead areas, allowing easy and efficient heating
  • Horizontal and vertical configurations available
  • Hydraulically balanced impeller for minimum bearing loads
  • Internal and external bearing lubrication and flush options
  • Solids handling capability up to concentrations of 30% and a particle size of 1 mm depending on the pumped fluid
  • Lower installation costs due to a single heating jacket for heating
  • Excellent heat distribution reducing temperature differences and preventing cold zones
  • Fast heat-up time assured by high heat transfer efficiency and heating energy delivered directly into the fluid chamber
  • Modular system consisting of just a few components, easy assembly

 image

MKP- S Self Priming Performance


Capacities: 1 to 80 m3/h
Heads: 5 m to 60 m
Pressure rating: PN 16
Temperatures: -100°C to +250°C

  • Pump dimensions to DIN EN ISO 2858, ANSI/ASME B73.3
  • Compact design with virtually no dead areas, allowing easy and efficient heating
  • Hydraulically balanced impeller for minimum bearing loads
  • Internal and external bearing lubrication and flush options
  • Integral priming chamber for high reliability and safety
  • Solids handling capability up to concentrations of 30% and a particle size of 1 mm depending on the pumped fluid
  • Self-priming with suction lift up to 8.5 m
  • Ideal for efficiently emptying tanks that have no bottom drain
  • Available with a double-walled jacketed discharge pipe
  • Modular system consisting of just a few components, easy assembly